Products
Acefix 9 Star
Product Lists
- Acescreed Concentrated
- Antirust Coating
- Block Fixing Mortar
- Bonding Agent
- Cementitious Grout
- Cleaner
- Crack Filler
- Enhancer
- Epoxy Adhesive
- Epoxy Coating
- Epoxy grout
- Grouts
- Mould Releasing Agent
- PU Adhesive
- Screed
- Sealers
- Slurry Additive
- Sparkling Series
- Special Adhesive
- Special Admixture
- Thickbed Mortar
- Thin Set Adhesive
- Tile Adhesive
- Tiles and Stone care
- Wall Care
- Waterproofing
Description
It is an excellent quality highly polymer modified thinset adhesive with exceptional flexibility and high bond strength for tiling difficult surfaces such as glass tiles, porcelain, large format natural stones on dry substrates like calcium silicate, gypsum, particle board, etc. With its unique blend of polymers, additives, fine aggregates and premium white or grey cement offers ultimate in bond strength for the most demanding installation requirements for large format tile or stones to most difficult-to-bond substrates.
Advantages:
- Special grade, excellent bonding.
- Excellent quality, Easy to fix.
- Suitable for both floor and wall, interior and exterior application.
- Excellent handling characteristics through extended open and adjustment time.
- Ideal for glass mosaic and all type of large format tile and stones.
- Outstanding flexibility with high strength for most difficult substrates and tile applications.
- Easy mixing with liquid, nice consistency.
- Very good mechanical property.
- Complies to Indian and International standards (IS 15477:2004/EN 12004/ANSI A 118.4).
- Mixing Ratio: 200 to 250ml for 1 kg powder
- Open Time: Approx 30 min
- Adjustment Time:Approx 30 min
- Pot Life: Approx 2 hrs 30 minutes
- Tensile adhesion strength: Minimum 350 PSI (2.41 N/mm²)
- Shear bond strength: Minimum 400 PSI (2.75 N/mm²)
- Compressive strength: Minimum 4500 PSI (31 N/mm²)
- Duration for light foot trafic: 6 hrs
- Duration for normal foot trafic: 24 hrs
- Duration for heavy foot trafic: 72 hrs
- Duration for grouting: 24 hrs
Mixing
Use 4.5 – 5 ltr of water for mixing 20 kg powder. Take water in a 20 ltr clean pail and pour powder slowly to the pail under slow mixing. Mix by hand or use a low speed drill mixer (150 – 200 rpm speed) to achieve a smooth, paste-like consistency. Let the homogeneously mixed adhesive mixture slake or stand 5 -10 minutes, stir again and use. Stir occasionally, but do not add more water. When properly mixed, troweled ridges will stand without slump.
Use a required size notch trowel to ensure proper coverage under tiles. Using the flat side of the trowel, apply a skim coat of mortar to the surface. With the help of properly notched or teeth side of the trowel held at a 45° angle, apply additional mortar to the surface, combing in one direction. Press the tile firmly into place in a perpendicular motion across ridges, moving back and forth. The perpendicular motion flattens ridges and closes valleys, allowing maximum coverage. With some tile, back-buttering is advisable. Adjust the tile promptly and beat it in with a beating block and rubber mallet. Periodically pull up a tile and check the back to ensure proper adhesive coverage. If the material has skinned over, recomb with the notch trowel. If too dry, remove and replace the dry material with fresh material. Material in the bucket will remain workable for approximately 3-4 hours.
- Interior and exterior applications for floor and wall.
- For glass tile, large format porcelain, ceramic and all type of natural stones.
- For facades, tile on tile and submerged application.
Acefix 9 Star |
|||
---|---|---|---|
Bag Calculator | |||
Area to be tiled | metres sq. | Quantity required in kg’s | |
Bed Thickness | mm | kg | |
20kg BAGS REQUIRED | |||
or | |||
40kg BAGS REQUIRED | |||
Note: Add 10% for wastage at site |
Recommended substrates:
- Cement floors, concrete bed.
- Masonry.
- Ceramic tiles and stones.
- Plaster.
- For most categories dry wall boards.
Surface preparation
Surfaces must be structurally strong. Remove all grease, oil, dirt, curing compounds, sealers, adhesives or any other contaminant that would prevent good bonding. Glossy or painted surfaces must be sanded, or abraded, and stripped off all contaminants. Concrete or plaster must be cured 28 days prior to bonding unless it is made with Acescreed or Aceplast Premium. Concrete must be free of efflorescence and not subject to hydrostatic pressure. Concrete slabs should have a course finish to enhance the bond. Roughen the surface by sanding or abrading, then rinse and allow to dry. Expansion joints should never be bridged with setting material. Surface temperature should be maintained above 10° C or below 38° C to achieve proper bond. For questions about proper installation, call Technical Services executives on +91 963 260 5577.
Pack size:
Available in 20 kg bags in grey and white colour.
Shelf life:
12 months if stored in cool and dry area in unopened bag. Shelf life is calculated from the month of manufacturing of the product.
Coverage:
Approximately 2.5 to 3 sft per 1 kg for 3 mm bed thickness. Coverage will vary depending on surface undulation and application variances.
Curing and protection:
Curing time is affected by ambient, surface temperatures and humidity. Generally, light foot traffic can be allowed in 16 hours at 25°C, normal foot traffic in 24 hours and heavy foot traffic in 7days after installation.
Grouting:
Grouting can be done after 24 hrs of installation of tiles. Use Acegrout superfine series grout for up to 3mm joints and Acegrout coarse series grout for 3 – 12 mm joints. Use Acepoxy Epoxy grout for stain and chemical resistance, hygienic grout. Please call customer service executive for more information.
Caution:
- Store in cool and dry place.
- High humidity or moisture will affect the product.
- Once bag is opened, then finish it off without keeping for long time.
- This product contains Portland cement and free silica. Avoid eye contact or prolonged contact with skin.
- Wash thoroughly after handling. If eye contact occurs, flush with water for 15 minutes and consult a physician.
- Do not breathe dust; wear PPE whenever necessary.