Products

• Used for interior and exterior application such as screeds, renders and
  underwater applications
  
• High compressive strength and thermal shock resistance
  
• High adhesion and lower water absorption
  
• Can use for repairing & patching of concrete floor and walls
  

Surfaces must be structurally strong. Remove all grease, oil, dirt, curing compounds, sealers, adhesives or any other contaminant that would prevent good bonding. Glossy or painted surfaces must be sanded or abraded and stripped off all contaminants. Concrete or plaster must be cured 28 days prior to bonding unless it is made with Acescreed. Concrete must be free of efflorescence and not subject to hydrostatic pressure. Concrete slabs should have a course finish to enhance the bond. Roughen the surface by sanding or abrading, then rinse and allow to dry. Expansion joints should never be bridged with setting material. Surface temperature should be maintained above 10° C or below 38° C to achieve proper bond. For questions about proper
installation, call Technical Services executives on +91 963 260 5577.

MIXING PROCEDURE:

Use approx 1ltr of Acemix TBL for mixing 30 kg powder. Take Acemix TBL and required amount of water in a 20 ltr clean pail and pour powder slowly to the pail under slow mixing. Mix by hand or use a low speed drill mixer (150 – 200 rpm speed) to achieve a smooth, paste-like consistency. Let the homogeneously mixed mastic slake or stand 5 -10 minutes, stir again and use. Stir occasionally, but do not add water.

It can also be mixed by creating a well in the middle of the mixed product, gradually add pre-measured water andAcemix TBL, mixing the product by shovel or trowel until a dry but moist workable mix is achieved. Stir occasionally, but do not add more water. Transfer the mixed product into a clean container and carry and pour into recess.

Coverage:

Up to 2 ltr per 30kg bag

Available Color:

White liquid

Shelf life:

12 months if stored in cool and dry area in unopened bag.

Interior and exterior applications for floor and wall
For facades, tile on tile and submerged application